The Dishwashing Results Are Not Satisfactory - hanseatic HG4585C107636RW Gebrauchsanleitung

The dishwashing results are not satisfactory

Problem
There are residues or
streaks on the dishes.
The dishes are not
completely clean.
Possible cause
The rinse aid is incorrect-
ly dosed.
There is no dishwasher
salt.
The dishwasher salt is
clumpy.
There are food scraps
which are encrusted onto
the dishes.
The dishes have not
been stacked optimally.
You have selected the
incorrect dishwashing
programme.
The dishwasher deter-
gent is incorrectly dosed.
The water pressure is too
low.
The spraying arm can not
rotate unhindered.
The nozzles on the
spraying arm are
blocked/calcified.
Troubleshooting table
Solution
Adjust the dispensed dose
(see „Changing the rinse aid dose"
on page EN-15).
Add dishwasher salt (see „Adding
dishwasher salt" on page EN-16).
Stir the dishwasher salt using the
end of a spoon or similar.
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets (see „Loading the dishwash-
er" on page EN-17).
Select the correct dishwashing pro-
gramme (see „Programme table"
on page EN-21).
Use the correct dosage of dish-
washer detergent (see „Programme
table" on page EN-21).
Turn the water tap on completely.
Ensure that no dishes are impeding
the motion of the spraying arm.
Clean the nozzles (see „Checking
and cleaning the spraying arms" on
page EN-29).
Page EN-37