modbar POUR OVER SYSTEM Betriebsanleitung Seite 4

O M
PERATING ANUAL
We do not recommend using adapters, multiple plugs and/or extension
cords. If you cannot avoid using them, make sure that they are exclusively
of the kind which conforms to local, national, and international electrical
codes and safety regulations, being careful not to exceed the power and
current ratings indicated on such adapters and extension cords.
This device must be used exclusively for the functions which it has been
designed and built for. Any other application is inappropriate and
dangerous. The manufacturer shall not be responsible for any damages
caused by improper and/or irrational use.
Using any electrical device requires that certain fundamental rules be
observed.
Do not touch the device with wet or humid hands and feet.
Do not use the device while having no shoes on your feet.
Do not use extension cords in bath or shower rooms.
Do not unplug the device from the power outlet by pulling on the
power supply cable.
Do not expose the device to atmospheric agents (rain, sun, etc.).
Do not allow children or untrained people to use this device.
Do not clean the control panel with a wet cloth since it is not
watertight.
Before performing any maintenance and/or cleaning operations, turn the
main power switch to the OFF position and disconnect the machine from
the power source by unplugging the cord or by switching off the relative
circuit breaker. For any cleaning operations, follow exclusively the
instructions contained in the manual.
If the equipment is operating in a faulty manner or breaks down, turn the
main power switch to the off position, disconnect the machine from the
power source (as described in the previous paragraph), and close the water
supply valve. Do not attempt to repair it. Contact a qualified and authorized
professional to perform any repair. Any repairs must be performed
exclusively by the manufacturer or by an authorized technician using only
original parts. Noncompliance with the above could compromise the safe
operation of the equipment.
P O S
OUR VER YSTEM
3