Profile Selection Screen - modbar POUR OVER SYSTEM Betriebsanleitung

O M
PERATING ANUAL

Profile Selection Screen:

home -> main settings -> profile selection
Back button: Wherever you see the back button it will take you to the previous screen.
Manual profile: This is a factory set profile. When assigned to either of the dispensing switches (or
both) the switch(s) will operate in a simple on/off (manual) dispensing mode. For this profile only
temperature edit is allowed. In this example the Manual Profile is assigned to both the Left and Right
switches, indicated by a teal blue "L" and "R" next to the profile name
Inactive profile: This is a profile that has profile information but is not active, indicated by a purple/grey
filled circle.
Empty profile: These are empty profile slots and may not be used until profiling data is entered. Empty
profiles are indicated by a non‐filled circle.
Assign Left: Pressing this button will assign the current cursor selected profile to the Left dispensing
switch. (You cannot assign an empty profile)
Assign Right: Pressing this button will assign the current cursor selected profile to the Right dispensing
switch.
Profile edit: Press the profile edit button to edit the profile data for the current cursor selected profile.
Cursor select: The dotted outline cursor select indicates which profile is selected on screen. You may
use the rotary encoder or up/down function of the joystick to navigate the profiles list. Pressing the
pushbutton will activate a selected profile.
P O S
OUR VER YSTEM
12