Percent Weighing - OHAUS PJX Serie Bedienungsanleitung

EN-10
Item Settings
To view or adjust the current settings.
Sample size: The sample size ranges from 1 to 100. The
default value is 10.
Note: If the APW of the last parts counting operation needs to
be kept, the user can press No when the display shows the
message Clr.Apwj (clear the average piece weight. Place
additional objects on the pan, and the corresponding number
of pieces will display.
APW Optimization:
Improving counting accuracy by re-calculating the piece weight
automatically as parts are added.
APW Optimization occurs only when the number of pieces
added to the pan is between one and three times the number
already on the pan.
Print Settings:
Changing printing setup. See Section 7 for more information.
4.3

Percent Weighing

Note: Before using any application, be sure the balance has been leveled and calibrated.
Use Percent Weighing to display the weight of a test object as a percentage of a pre-established reference
sample.
Note: The minimum reference weight should be no less than 0.1d.
Percent Weighing
1. Press and hold the Function / Mode button until
PerCent appears.
2. After confirmation by pressing Yes, the message
Clr.ref (clear the reference) will appear on the screen.
PJX Series Balance