Transmission; Handshake; Print Settings; Stable Only - OHAUS PJX Serie Bedienungsanleitung

EN-28

5.5.2 Transmission

Set the data bits, stop bit, and parity.
8-N-1 = 8 data bits, no parity, stop bit 1
8-N-2 = 8 data bits, no parity, stop bit 2
7-E-1 = 7 data bits, even parity, stop bit 1
7-E-2 = 7 data bits, even parity, stop bit 2
7-N-1 = 7 data bits, no parity, stop bit 1
7-N-2 = 7 data bits, no parity, stop bit 2
7-O-1 = 7 data bits, odd parity, stop bit 1
7-O-2 = 7 data bits, odd parity, stop bit 2
Parity

5.5.3 Handshake

Set the flow control method.
NONE = no handshaking
XON-XOFF = XON/XOFF handshaking
HARDWARE = hardware handshaking
H.ShAkE
ON-OFF

5.6 Print Settings

Enter this sub-menu to customize data transfer settings.

5.6.1 Stable Only

Off = values are printed immediately regardless of
On = values are printed only when the stability criteria are met.
Parity
Handshake
Xon / Xoff
8 data bits, stop bit 1
None
stability.
PJX Series Balance
8-N-1
NONE
HRrdwW
Hardware
Print
Stable