Inhaltsverzeichnis; General Safety Warnings - Max SN890CH2 34 Betriebsanleitung

OPERATING AND MAINTENANCE MANUAL
INDEX
1. GENERAL SAFETY WARNINGS ......................................3
2. SAFETY WARNING ........................................................... 4
3. SPECIFICATIONS AND TECHNICAL DATA .................... 7
4. AIR SUPPLY AND CONNECTIONS .................................. 8
5. INSTRUCTIONS FOR OPERATION ................................ 10
6. MAINTENANCE FOR PERFORMANCE.......................... 18
7. STORAGE ........................................................................ 18
8. TROUBLE SHOOTING/REPAIRS.................................... 18
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING

1. GENERAL SAFETY WARNINGS

WARNING
READ ALL SAFETY WARNINGS AND ALL
INSTRUCTIONS.
Failure to follow the warnings and instructions
may result in death serious injury. Save all warn-
ings and instructions for future reference.
ENGLISH
1. WEAR SAFETY GLASSES OR GOGGLES
Danger to the eyes always exists due to the possibility of
dust being blown up by the exhausted air or of a fastener fly-
ing up due to the improper handling of the tool. For these
reasons, safety glasses or goggles shall always be worn
when operating the tool.
The employer and/or user must ensure that proper eye pro-
tection is worn. Eye protection equipment must conform to
the requirements of the American National Standards Insti-
tute, ANSI Z87.1 (Council Directive 89/686/EEC of 21 DEC.
1989) and provide both frontal and side protection.
The employer is responsible to enforce the use of eye pro-
tection equipment by the tool operator and all other person-
nel in the work area.
NOTE: Non-side shielded spectacles and face shields
alone do not provide adequate protection.
2. EAR PROTECTION MAY BE REQUIRED IN SOME ENVI-
RONMENTS
As the working condition may include exposure to high noise
levels which can lead to hearing damage, the employer and
user should ensure that any necessary hearing protection is
provided and used by the operator and others in the work area.
3