Trouble Shooting - CONSTRUCTA CD688860 Gebrauchs- Und Montageanleitung

Cleaning the metal mesh grease filters
These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
:
Risk of fire!
Fatty deposits in the grease filter may catch fire. Regularly
clean the grease filter. Never operate the appliance without a
grease filter.
Notes
Do not use aggressive, acidic or alkaline cleaning products.
■
We recommend cleaning the grease filters every 2 months.
■
When cleaning the metal grease filters, also clean the metal
■
grease filter holder in the appliance using a damp cloth.
The metal grease filters can be cleaned in the dishwasher or
■
by hand.
By hand:
Note. You can use a special degreaser to remove stubborn dirt.
This can be ordered from the online shop.
Soak the metal grease filters in hot soapy water.
■
Clean the filters with a brush and then rinse them thoroughly.
■
Leave the metal grease filters to drain on an absorbent
■
material.
In the dishwasher:
Note: Slight discolouration may occur if the metal grease filters
are cleaned in the dishwasher. This discolouration has no effect
on the performance of the metal grease filters.
Use normal domestic dishwashing detergents.
■
Do not clean heavily soiled metal grease filters together with
■
cookware.
Place the metal grease filters in the dishwasher, leaving
■
plenty of space around them. Do not trap the metal grease
filters.
Select a temperature of no more than 50 °C.
■

Trouble shooting

Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Malfunction table
Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
The lighting The LED lights
does not work. are defective.
The button illu- The control unit
mination does is faulty.
not work.
--------
T r o u b l e s h o o t i n g
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse
for the appliance is OK
Call the after-sales ser-
vice.
Call the after­sales ser-
vice.
Installing the metal mesh grease filter
:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Note: Clean all accessible parts of the housing.
Insert the metal grease filter and lock it in place. When you
1.
do this, take hold of the metal grease filter from underneath
with your other hand.
Note: Make sure that the metal grease filter is positioned
correctly.
If the metal grease filter has not been inserted correctly, open
2.
the lock and reinsert the metal grease filter correctly.
LED lights
Defective LED lights may be replaced by the manufacturer, their
customer service or a qualified technician (electrician) only.
:
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into the
switched on LED lights for longer than 100 seconds.
21