Trouble Shooting; Led Lights; Malfunction Table; Customer Service - CONSTRUCTA CD616650 Montageanleitung

Installing the metal mesh grease filter
:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Note: Clean all accessible parts of the housing.
Insert the metal grease filter and lock it in place. When you
1.
do this, take hold of the metal grease filter from underneath
with your other hand.
Note: Make sure that the metal grease filter is positioned
correctly.
If the metal grease filter has not been inserted correctly, open
2.
the lock and reinsert the metal grease filter correctly.

Trouble shooting

Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.

Malfunction table

Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
The lighting The LED lights
does not work. are defective.
The button illu- The control unit
mination does is faulty.
not work.

Customer service

When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate with these numbers can be
found inside the appliance (remove the metal mesh grease
filter to gain access).
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
After-sales serviceO
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
T r o u b l e s h o o t i n g
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse
for the appliance is OK
Call the after-sales ser-
vice.
Call the after­sales ser-
vice.
C u s t o m e r s e r v i c e
FD no.

LED lights

Defective LED lights may be replaced by the manufacturer, their
customer service or a qualified technician (electrician) only.
:
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into the
switched on LED lights for longer than 100 seconds.
Please find the contact data of all countries in the enclosed
customer service list.
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.

Accessories

(not included in the scope of delivery)
Note: These instructions apply to several appliance models. It
may be the case that an optional accessory that is listed does
not apply for your appliance.
Note: Observe the installation instructions in the accessory.
Accessories
Starter set for air recirculation mode
--------
Order number
CZ5138X5
19