Trouble Shooting; Malfunction Table; Led Lights - CONSTRUCTA CD639860 Gebrauchs- Und Montageanleitung

Installing the metal mesh grease filter
:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Note: Clean all accessible parts of the housing.
Insert the metal grease filter and lock it in place. When you
1.
do this, take hold of the metal grease filter from underneath
with your other hand.
Note: Make sure that the metal grease filter is positioned
correctly.
If the metal grease filter has not been inserted correctly, open
2.
the lock and reinsert the metal grease filter correctly.

Trouble shooting

Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
20
T r o u b l e s h o o t i n g

Malfunction table

Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
The lighting The LED lights
does not work. are defective.
The button illu- The control unit
mination does is faulty.
not work.
--------

LED lights

Defective LED lights may be replaced by the manufacturer, their
customer service or a qualified technician (electrician) only.
:
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into the
switched on LED lights for longer than 100 seconds.
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse
for the appliance is OK
Call the after-sales ser-
vice.
Call the after­sales ser-
vice.