General Information; Checking The Wall; Electrical Connection - CONSTRUCTA CD688860 Gebrauchs- Und Montageanleitung

General information

Checking the wall

The wall must be level, vertical and adequately load-bearing.
■
The depth of the bore holes must be the same length as the
■
screws. The wall plugs must have a secure grip.
The enclosed screws and wall plugs are suitable for solid
■
brickwork. Suitable fasteners must be used for other
structures (e.g. plasterboard, porous concrete, poroton
bricks).
The maximum weight of the extractor hood is 40 kg.
■

Electrical connection

:
Risk of electric shock!
Components inside the appliance may have sharp edges.
These may damage the connecting cable. Do not kink or pinch
the connecting cable during installation.
The required connection information can be found on the rating
plate on the top of the appliance.
Length of the cable: approx. 1.30 m
This appliance complies with the EC interference suppression
regulations.
:
Risk of electric shock!
It must always be possible to disconnect the appliance from the
power supply. The appliance must only be connected to a
protective contact socket that has been correctly installed. If the
plug can no longer be reached after installation, an energy-
isolating device in the phases must be provided in the
permanent electrical installation in accordance with the
installation regulations. The permanent electrical installation
must only be wired by a professional electrician. We
recommend installing a residual-current circuit breaker (RCCB)
in the appliance's power supply circuit.
26
G e n e r a l i n f o r m a t i o n