INSTALLATION INSTRUCTIONS
Installation instructions
: Important safety information
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for
future use or for subsequent owners.
Check the appliance for damage after
unpacking it. Do not connect the appliance
if it has been damaged in transport.
The appliance can only be used safely if it
is correctly installed according to the safety
instructions. The installer is responsible for
ensuring that the appliance works perfectly
at its installation location.
24
This appliance is installed on the wall.
■
Check the position of the screws using the enclosed
■
template.
Follow the enclosed installation instructions for additional
■
special accessories (e.g. for circulating-air mode).
The surfaces of the appliance are sensitive. Avoid damaging
■
them during installation.
I m p o r t a n t s a f e t y i n f o r m a t i o n
The surfaces of the appliance are easily
damaged. Avoid damaging them during
installation.
The width of the extractor hood must
correspond at least with the width of the
hob.
For the installation, observe the currently
valid building regulations and the
regulations of the local electricity and gas
suppliers.