Changing The Rinse Aid Dose - hanseatic HG5544F63602EW Gebrauchsanleitung

Dishwasher detergents, rinse aids and dishwasher salts
1. Turn the catch of the rinse aid dispenser
(22) a quarter turn in an anticlockwise di-
rection and remove it.
2. Fill the water tank to the "max" mark in the
opening. The adjacent inspection window
turns black.
3. Wipe away any rinse aid which has spilt
immediately so that you don't compromise
the rinsing results and to avoid increased
foaming.
4. Insert the rinse aid dispenser catch (22)
and give it a quarter turn clockwise.
The markings on the lid and the rinse aid
dispenser (22) must be aligned upon
insertion.

Changing the rinse aid dose

To select the dose, you must remove the
catch from the rinse aid dispenser (22)
(see "Adding rinse aid" on page EN-14).
We would recommend that you do not change
the dose that was set by the factory initially.
If the dishes are
– dull and stained, you should increase the
dose by turning the arrow on the rinse aid
dispenser to a higher value.
– sticky and smeared, you should decrease
the dose by turning the arrow on the rinse
aid dispenser to a lower value.
Page EN-15