The Dishwashing Results Are Not Satisfactory - hanseatic HG5544F63602EW Gebrauchsanleitung

Page EN-32 Troubleshooting table

The dishwashing results are not satisfactory

Problem
There are residues or
streaks on the dishes.
The dishes are not completely
clean.
Possible cause
The rinse aid is incorrectly
dosed.
There is no dishwasher salt.
The dishwasher salt is
clumpy.
There are food scraps which
are encrusted onto the
dishes.
The dishes have not been
stacked optimally.
You have selected the
incorrect dishwashing
programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too
low.
The spraying arm is impeded
when rotating.
The nozzles on the spraying
arm are blocked/calcified.
Solution
Adjust the dispensed dose
(see "Changing the rinse aid
dose" on page EN-15).
Add dishwasher salt
(see "Adding dishwasher
salt" on page EN-16).
Stir the dishwasher salt using
the end of a spoon or similar.
Soak dirty dishes prior to
washing the dishes.
Stack the dishes in such
a way that all parts can be
reached by the water jets
(see "Loading the dishwash-
er" on page EN-17).
Select the correct
dishwashing programme
(see "Programme table" on
page EN-20).
Use the correct dose of dish-
washer detergent
(see "Programme table" on
page EN-20).
Turn the water tap on com-
pletely.
Ensure that no dishes are
impeding the motion of the
spraying arm.
Clean the nozzles
(see "Checking and clean-
ing the spraying arms" on
page EN-25).