Changing The Rinse Aid Dose - hanseatic HGTI6082D137709HS Gebrauchsanleitung

Dishwasher detergents, rinse aids and dishwasher salts
1. Turn the catch of the
rinse aid dispenser (19) a quarter turn in
an anticlockwise direction and remove it.
2. Fill the water tank to the "max" mark in
the opening. The adjacent inspection
window turns black.
3. Wipe away any rinse aid which has spilt
immediately so that you don't compro-
mise the rinsing results and to avoid in-
creased foaming.
4. Insert the catch of the rinse aid dispens-
er (19) and give it a quarter turn clock-
wise. The markings on the lid and the
rinse aid dispenser (19) must be aligned
upon insertion.

Changing the rinse aid dose

To select the dose, you must remove the
catch from the rinse aid dispenser (19) (see
„Adding rinse aid" on page EN-14).
We would recommend that you do not change
the dosage that was set by the factory initially.
If the dishes are
– dull and stained, you should increase the
dose by turning the arrow on the rinse aid
dispenser to a higher value.
– sticky and smeared, you should decrease
the dose by turning the arrow on the rinse
aid dispenser to a lower value.
Page EN-15