Programming Loco Settings - FLEISCHMANN 18.4 Betriebsanleitung

Z21 Mobile App
Highlight:
▶ Clear access to the most important
locomotive settings
The maximum speed of the locomotives
is regulated down to the maximum speed
of the roller dynamometer.
48

3.7 Programming Loco Settings

In the tab "Locomotive settings" you can defi ne the basic setting for each of your locomotives. It
only includes the most important parameters – this way it is easy even for beginners to fi nd their way
around.
Back to loco
library
Locomotive name
Loco decoder address
Maximum speed
Fade in/out of
loco library
Include image
Setting of protocol and driving
stage:
During automatic capturing,
smartRail always stores "DCC" as
the decoder protocol for DC
locomotives and "128" as driving
stage; for AC locomotives it always
stored "Motorola" and "28". Even
if you use an existing locomotive
library, the locomotives are loaded
with the above default settings,
because the real values are not
saved in the app, but in your digital
control centre. Here, you can
change these settings.