Legal Information - FLEISCHMANN 18.4 Betriebsanleitung

Legal Information

34
Legal Information
Before putting smartRail into operation, please note the following information:
When combining Roco or Fleischmann components with products by third party manufacturers,
▶
we provide no warranty in case of damage or malfunction.
If the smartRail case is opened your claim to warranty is voided.
▶
Connections should only be made when the operating voltage is switched off !
▶
Work carefully: Incorrect connections may destroy digital components. If necessary, ask your specia-
▶
lised dealer for help.
Never connect an analogue transformer or other digital systems or command centre to the same or
▶
adjoining current circuits. This may destroy smartRail!
Do not use smartRail with older Roco amplifi ers (e.g. art. no. 10761 and 10764).
▶
The lenses of the infrared sensors must not be touched and scratched!
▶
When operating a locomotive with steam generator, the Plexiglas cover must be removed.
▶
Store and operate only at room temperature!
▶
Do not set up near radiators or in places with direct sunlight!
▶
Avoid major fl uctuations of temperature and air humidity!
▶
The sensors work optically and can be blinded. Therefore, avoid excessive exposure to light. This may
▶
cause an unintentional emergency stop.
Do not operate smartRail with glass hood as this may interfere with the sensors.
▶
The manufacturer does not guarantee that smartRail is compatible with all locomotive geometries.
▶
The maximum speed of the locomotives is regulated down to the maximum speed of the roller
▶
dynamometer.
Depending on their geometry, the locomotives must have a length of 120mm to 305mm.
▶
Depending on their geometry, smaller locomotives must be driven with carriages attached.
▶