Connecting To The Power Supply - Stihl SE 33 Gebrauchsanleitung

English
￭ If the wet/dry vacuum cleaner starts behaving differently
or in an unusual way while operating, the wet/dry vacuum
cleaner may be in an unsafe condition. This can result in
serious injuries and damage to property.
► Stop working, unplug the mains plug from the socket
and consult a STIHL servicing dealer.
► Operate the wet/dry vacuum cleaner upright.
► Do not cover the wet/dry vacuum cleaner to ensure
sufficient circulation of cooling air.
￭ Foam may be produced when picking up liquids. The foam
may fail to actuate the float and foam may be drawn into
the motor. The wet/dry vacuum cleaner may be damaged.
► If foam appears: Stop working, unplug the mains plug
from the socket and consult a STIHL servicing dealer.
4.8

Connecting to the power supply

Contact with live components may occur for the following
reasons:
– The connecting cable or the extension cord is damaged.
– The mains plug of the connecting cable or extension cord
is damaged.
– The socket is not properly installed.
DANGER
￭ Contact with live parts may result in electric shock. This
may result in serious or fatal injury to the user.
► Make sure that the connecting cable, extension cord
and their mains plugs are undamaged.
If the connecting cable or the extension cord is
damaged:
► Do not touch the damaged area.
► Disconnect the mains plug from the power
supply.
► Make sure your hands are dry before touching the
connecting cable, extension cord or mains plugs.
28
► Plug the mains plug of the connecting cable or
extension cord into a properly installed, shockproof
socket with the correct fuse rating.
￭ A damaged or unsuitable extension cord can result in
electric shock. This may result in serous or fatal injury to
people.
► Use an extension cord with the correct cross-section,
@ 16.2.
► Use a splash water protected extension cord approved
for outdoor use.
► Use an extension cord that has the same characteristics
as the connecting cable of the wet/dry vacuum cleaner,
@ 16.2.
WARNING
￭ During operation, incorrect mains voltage or incorrect
mains frequency may result in an overvoltage in the
wet/dry vacuum cleaner. The wet/dry vacuum cleaner may
be damaged.
► Make sure that the mains voltage and the mains
frequency of the power supply match the data on the
rating plate of the wet/dry vacuum cleaner.
￭ If several electric power tools are connected to a multiple
socket, electrical components may be overloaded during
operation. The components may overheat and cause a
fire. Persons may be seriously or fatally injured and
property may be damaged.
► Only ever connect one wet/dry vacuum cleaner to one
socket.
► Do not connect a wet/dry vacuum cleaner to multiple
sockets.
￭ An incorrectly routed connecting cable or extension cord
may be damaged and people may trip over it. This may
result in injury to persons and damage to the connecting
cable.
► Route and mark the connecting cable and extension
cord so that people will not trip over them.
► Route the connecting cable and extension cord so that
they are not under tension or tangled.
4 Safety Precautions
0458-889-9621-A