AEG BP8715001 Benutzerinformation Seite 30

30 www.aeg.com
Downloaded from www.Manualslib.com
Removing the oven door and the glass panels
Clean the door with a wet sponge and
rub it dry with a soft cloth. Do not use
steel wool, acids or abrasive cleaning
agents because they can damage the
surface.
Installing the door and the
glass panels
When the oven door is clean, install the
glass panels in the opposite sequence.
Make sure that you put the glass panels
back in the correct order.
The middle glass panels have a graphic
located on the top. The third glass panel
has screen printings. In others, it is trans-
parent.
manuals search engine
1. Press the buttons at the sides of the
A
door trim (A) on the upper cover and
pull it upwards to remove it.
2.
B
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the
glass panel frame is not rough when you
touch it.
Hold the inner glass B tightly with
both hands and slide it upwards to
remove it from its initial position. Do
the same with the other glass pan-
els.
CAUTION!
Make sure that you tightly hold
the glasses to prevent them from
falling.