Herunterladen Inhalt Inhalt Diese Seite drucken

Battery Disposal - VOLTCRAFT VC271 TRMS Bedienungsanleitung

Digital-multimeter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12. Disposal
a) General information
This product must not be disposed of in household waste.
Dispose of the product in accordance with local laws (e.g. return it to a suitable collection point).
Remove any batteries and dispose of them separately from the product.
b) Battery disposal
You are required by law to return all used batteries. They must not be placed in household waste.
Batteries that contain hazardous substances are labelled with this symbol to indicate that disposal in
household waste is forbidden.
The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead.
Used batteries can be returned to local collection points, our stores or battery retailers.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
13. Troubleshooting
The multimeter was designed using the latest technology and is safe to use. However, problems and malfunc-
tions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions.
Error
The multimeter does not work.
The measured value does not
change.
The multimeter cannot take
measurements in the 10 A range.
The multimeter cannot take
measurements in the mA/µA
range.
Any repair work other than that described above must be carried out by an authorized technician.
If you have questions about the multimeter, please contact our technical support team.
60
Possible cause
Is the battery empty?
Have you selected the wrong meas-
urement mode (AC/DC)?
Did you use the wrong terminals?
Is the hold function enabled?
Is the fuse in the 10 A input defec-
tive?
The PTC fuse was triggered, which
limits the measuring current.
Solution
Check the status.
Replace the batteries.
Check the display (AC/DC) and
select another mode if necessary.
Check that the test leads are con-
nected to the correct terminals.
Disable the hold function.
Check the 10A F1 fuse.
Reduce the measuring current or
switch to the 10 A measuring range.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vc-270

Inhaltsverzeichnis