Tutorial; Inserting Batteries; Configuration - Mettler Toledo Densito 30P Bedienungsanleitung

Downloaded from www.Manualslib.com

Tutorial

4 Tutorial
4.1

Inserting batteries

- Open the battery compartment cover on the back of the Densito 30P.
- Remove battery compartment.
- Insert batteries into the battery compartment, observing correct polarity.
- Insert battery compartment, ensuring that the contacts of the battery compart-
ment face the instrument.
- Close battery compartment cover.
The instrument switches on automatically and is immediately ready for operation.
If nothing appears in the display
- Check polarity of the batteries and battery compartment.
4.2

Configuration

Configuring the instrument for test measurement.
Entering the menu
- Press the keys ok/meas. and esc simultaneously.
The instrument switches to the FUNCTION menu, Measure Unit appears in
reverse display (white on black).
Selecting setting
- Confirm
Measure Unit
- Press the key repeatedly until SG(t/t) is marked.
- Confirm SG(t/t) by pressing the ok/meas. key.
Exiting the menu
- Press the esc key.
The instrument is configured for test measurement.
6
manuals search engine
by pressing the ok/meas. key.
METTLER TOLEDO Densito 30P