Mettler Toledo Densito 30P Bedienungsanleitung Seite 12

Downloaded from www.Manualslib.com
Menu (menu)
API (American Petroleum Institute)
Measurement of an API degree of product group A, B or D calculated to a tem-
perature of 15 °C or 60 °F.
Product group A Crude oil
Product group B Fuel, petroleum products
Product group D Lubricant
Brix (Sucrose)
Measurement of the sucrose concentration, percent weight at 20 °C.
Alcohol (Alcohol)
Measurement of the alcohol concentration in water, percent weight (Wt%) or
percent volume (Vol%) at 20 °C.
H2SO4 (Sulphuric acid concentration)
Measurement of the sulphuric acid concentration, percent weight at 20 °C.
Baume (°Baumé scale)
Measurement in °Baumé calculated to a reference temperature.
10 temperature-compensation coefficients can be saved.
Input of temperature-compensation coefficients via Comp. Density.
For typical temperature-compensation coefficients, see Chapter 13.2; calcula-
tion of α, see page 11.
Plato
Measurement of the °Plato at 20 °C.
Proof
Measurement of the Proof degree at 60 °F.
The Proof degree is a unit used to determine the alcohol content.
Proof (US): Measurement with US unit (100 v/v % = 200 US Proof ).
Proof (IP): Measurement with IP unit (100 v/v % = 175 British Proof ).
Conc. (Concentrations)
Measurement of the concentration via the input of the desired concentration-
conversion formula y = a + bx at a reference temperature.
y = concentration in % or without units
a, b = sample-dependent coefficients
x = measured density. The following units are possible for x:
• 1/compensated density – 1
• compensated density – 1
• compensated density
• 1/specific gravity – 1
• specific gravity – 1
• specific gravity
10 temperature-compensation coefficients can be saved.
Input of temperature-compensation coefficients via Comp. Density.
For typical temperature-compensation coefficients, see Chapter 13.2; calcula-
tion of α, see page 11.
10
manuals search engine
METTLER TOLEDO Densito 30P