Selecting Lamp Operation Mode - ViewSonic Pro9500 Bedienungsanleitung

3.3 Selecting lamp operation mode

Select the DUAL or ALTERNATE lamp operation mode.
1.
Highlight LAMP MODE in the STACK menu with
the ▲/▼ buttons, then press the ► button to
display the LAMP MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight DUAL or ALTERNATE.
DUAL: Turns on the projectors at the same time.
ALTERNATE: Turns on the projectors alternately.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting.
• If DUAL is selected, a menu to select MAIN or SUB appears on
NOTE
screen when a button on the control panel of the projector or remote control is
pressed. Select the projector that you want to operate. Refer to the examples
below.
- When the MENU button is pressed, a menu to select MAIN or SUB is
displayed. If MAIN is selected, EASY MENU or ADVANCED MENU of the
Main projector is displayed.
- When the KEYSTONE button is pressed, a menu to select MAIN or SUB is
displayed. If MAIN is selected, KEYSTONE menu of the Main projector is
displayed.
• When DUAL is selected for LAMP MODE, there are operating restrictions as
follows.
- AUTO POWER OFF and
FREEZE functions on both
projectors are disabled.
- The test patterns for CUSTOM of
GAMMA and COLOR TEMP are
not displayed.
- It takes slightly longer time to
turn on the projectors. This is not
a malfunction.
(continued on next page)
ViewSonic
Downloaded from www.Manualslib.com manuals search engine
STACK menu settings

Menu to select
MAIN or SUB
Menu to select
MAIN or SUB
239
Menu on Main projector

Menu on Main projector
Pro9500