ViewSonic Pro9500 Bedienungsanleitung Seite 208

Network Bridge Communication
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communicaton, an external
device that is connected with this projector by RS-232C communication can be
controlled from the computer as a network terminal.
For details, see the 6. Network Bridge unction in the Network Guide.
Connection
Connect the computer's LAN port and the projector's LAN port with a LAN
1.
cable.
Connect the projector's CONTROL port and the RS-232C port of the
2.
devices that you want to control with a RS-232C cable.
Turn the computer on, and after the computer has started up turn the projector
3.
on.
Set the COMMUNICATION TYPE to NETWORK BRIDGE. (OPTION menu -
4.
SERVICE - COMMUNICATION in the Operating Guide)
ViewSonic
Downloaded from www.Manualslib.com
CONTROL
manuals search engine
Network Bridge Communication
LAN
LAN
RS-232C
203 Pro9500