Stack Menu Settings; Displaying Stack Menu - ViewSonic Pro9500 Bedienungsanleitung

3. STACK menu settings

Set the Intellectual Stack operation using the STACK menu.
• If you are using Simple Stack without RS-232C connection, skip this
NOTE
chapter.
• If you do not need to change the settings made during the installation
explained prior to this chapter, go to 3.3 Selecting lamp operation mode.
• Read 3.7 Important information for Intellectual Stack carefully.

3.1 Displaying STACK menu

Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen. (Operat-
ing Guide → OPTION menu) The setting for
Intellectual Stack operation starts from this menu.
• Check that the following settings are made on both projectors.
NOTE
Otherwise, STACK menu on the projectors cannot be operated.
- STANDBY MODE in SETUP menu: NORMAL
(Operating Guide → SETUP menu)
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide → OPTION menu)
- STACK LOCK in SECURITY menu: OFF
ViewSonic
Downloaded from www.Manualslib.com manuals search engine
237 Pro9500