Selecting Lamp Switching Mode - ViewSonic Pro9500 Bedienungsanleitung

3.4 Selecting lamp switching mode

The following setting is necessary only when ALTERNATE is selected in the
LAMP MODE dialog. Select the AUTO or NORMAL lamp switching mode when
using ALTERNATE.
1.
Highlight ALTERNATE MODE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the ALTERNATE MODE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight AUTO or NORMAL.
AUTO: Turns on the projector with the least lamp usage.
NORMAL: Turns on the projector that was not used the previous time.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting.
NOTE • The ALTERNATE MODE dialog can be operated on the Main
projector when ALTERNATE is selected in the LAMP MODE dialog.
• To maintain the quality and reliability of the two projectors, the projector with
the most lamp usage may be turned on even if AUTO is selected.
ViewSonic
Downloaded from www.Manualslib.com manuals search engine
STACK menu settings
241 Pro9500