Stimulation With 2 Programs - schwa-medico AS SUPER 4 digital Gebrauchsanweisung

Example: Selecting the program 2.2 (Han 3)
Turn ON the device by pressing the key.
Press the P key until 2.0 is shown on the upper left side of the display. You have selected
the program group no. 2. Press the
display. You have now selected the subprogram no. 2.2.The stimulation can then be
started by increasing the intensity with the
Stimulation with 2 different programs
The AS SUPER 4 digital offers the possibility to stimulate with
one program for channels 1 and 2 and with another program
for channels 3 and 4.
Enter the selecting mode:
Press the P key for 4 seconds to enter the selecting mode. This
is indicated by an acoustic signal an shown on the display by
2 different programs flashing in the illustration beside.
Select a program for channels 1 and 2:
Press the key of channel 1 to select the program group.
Press the key of channel 2 to select the subprogram.
Select a program for channels 3 and 4:
Press the key of channel 3 to select the program group.
Press the key of channel 4 to select the subprogram.
The frequency and the pulse width of the selected programs also flash on the display.
If you do not make any changes for 4 seconds, the device automatically returns to the
stimulation mode. This is indicated by an acoustic signal. The stimulation can then be
started by increasing the intensity with the keys of each connected channel.
Example: Selecting program 1.0 for channels 1 and 2 and program 1.3 for channels
3 and 4
Switch ON the device by pressing the key.
Press the P key until you have selected the program group no. 1.
Press the E key until you have selected the subprogram no. 0.
Press the P key for 4 seconds to enter the selection mode for the stimulation with 2
different programs. Both programs flash on the display.
Press the key of channel 3 to select the program group no. 1.
Press the key of channel 4 to select the subprogram no. 3.
4 seconds after pressing the last key, the device returns to the stimulation mode. This is
indicated by an acoustic signal.
The stimulation can then be started by increasing the intensity with the keys for each
connected channel.
E key until 2.2 is shown on the upper left side of the
keys of each connected channel.
31
English