Free Programs; Factory Settings - schwa-medico AS SUPER 4 digital Gebrauchsanweisung

Free programs (own parameter settings)
The frequency, the pulse width and the therapy duration of
the programs no. 1.0, 1.1, 1.2, 1.3, 3.0, 3.1 and 3.2 can be modi-
fied for own parameter settings.
Setting parameter for program no. 1.0, 1.1, 1.2, 1.3
(standard stimulation)
Select the program with the
Press the E key for 4 seconds to enter the parameter modifica-
tion mode. This is indicated by an acoustic signal and the word
"SET" flashes on the display.
Press ▲▼ key of channel 1 or 3 to modify the intensity bet-
ween 1 Hz and 120 Hz.
Press ▲▼ key of channel 2 or 4 to modify the pulse width bet-
ween 50 µs and 300 µs.
Press the key to save the changes.
E
Press ▲▼ key of channel 1 or 3 to modify the time between 10 min and 90 min.
4 seconds after pressing the last key, the device automatically returns to the stimula-
tion mode. This is indicated by an acoustic signal.
The stimulation can then be started by increasing the intensity with the ▲ keys of each
connected channel.
Setting parameter for program no. 3.0, 3.1, 3.2 (HAN stimulation)
Select the program with the
Press the E key for 4 seconds to enter the parameter modification mode. This is indicated
by an acoustic signal and the word "SET" flashes on the display.
Press ▲▼ key of channel 1 or 3 to modify the intensity between 1 Hz and 120 Hz.
Press ▲▼ key of channel 2 or 4 to modify the pulse width between 50 µs and 300 µs.
Press the E key to save the changes.
Press ▲▼ key of channel 1 or 3 to modify the time between 10 min and 90 min.
Press the E key to save the settings of the first frequency. You can now set the second
parameters which will alternate every 3 seconds with the first parameters you have
selected.
Press ▲▼ key of channel 1 or 3 to modify the intensity between 1 Hz and 120 Hz.
Press ▲▼ key of channel 2 or 4 to modify the pulse width between 50 µs and 300 µs.
4 seconds after pressing the last key, the device automatically returns to the stimulation
mode. This is indicated by an acoustic signal.
The stimulation can then be started by increasing the intensity with the ▲▼ keys of
each connected channel.

Factory settings

Press the key for 4 seconds to retrieve the factory settings and delete the changed
parameters in the AS SUPER 4 digital. This is indicated by an acoustic signal.
P and E key.
P and E key.
33
English