Identifying And Solving Problems - Gazelle Makki Benutzerhandbuch

62

6.2 Identifying and solving problems

Problem
The pedal assistance does not start.
The rear brake and/or front
21
brake is making a squeaking
39
noise.
Three LEDs of the charge
indicator are flashing.
42
The battery empties quickly.
12
The bike does not brake well.
Makki
Cause
The battery is empty.
12
The plug pins are insufficiently
greased.
When the bike is used for the first
time, the disc brakes can make a
squeaking noise because the brake
blocks and discs have not yet been
ridden in.
The battery is outside the charg-
12
ing temperature range.
The charging capacity of
the battery has decreased.
12
The brakes are not adjusted correctly
or are worn.
Remedy
Charge the battery. See section 3.3.2 (page 32).
Contact a Gazelle service specialist to check
whether this is the cause.
The brake blocks must be ridden in by the user.
If the squeaking continues, try cycling slowly while
lightly operating the brakes in order to have the
components interact with one another better.
If this does not solve the problem then please con-
tact your Gazelle specialist.
Remove the battery from the charger
12
allow it to reach the correct temperature.
Only connect the battery back onto the charger
when the permitted charging temperature has been
reached (between 0 °C and 40 °C).
Consult section 3.10.4 (page 49) and check whether
one of the factors can be taken into consideration.
Replace the battery . Contact a Gazelle specialist.
12
Replace or check the brakes.
Contact a Gazelle specialist.
and
70