Walk Assist - Gazelle Makki Benutzerhandbuch

•
: Steady assistance for rides with long range.
TOUR
•
: Powerful assistance for a sporty ride over hilly
SPORT
stretches and cycling in town.
•
: Maximum assistance when pedalling hard, for a
TURBO
sporty ride and steep hills.
To adjust the assistance level:
1. Ensure that the drive unit has been switched on.
See 'Switching drive unit on/off', section 3.7.1 (page 37).
52
53
2. Press the button + or the button –
52
desired assistance level.
3.7.3
The Walk Assist function can make it easier to push the bicycle
while walking. The speed in this function depends on the
selected gear and can reach up to 6 km/hour. This function
must only be used when wheeling the bicycle on foot.
Before using the Walk Assist take the following into
to go to the
53
consideration:
•
The Walk Assist function must only be used when wheeling
the bicycle on foot.
•
Do not switch on the Walk Assist if the wheels of the bicycle
are not touching the ground. There would otherwise be a
risk of injury
•
When the Walk Assist has been switched on it is possible
that the pedals will also move. When Walk Assist has been
activated
take care that your legs are far enough away from the mov-
ing pedals. There is the risk of injury.
Gazelle Makki Manual | 39

Walk Assist

" " There is a risk of injury if the wheels of
WARNING
the bicycle are not in contact with the ground
when using Walk Assist.
" " Before using the Walk Assist function
WARNING
ensure that you have read and understood the
below instructions.
Using the Makki