Adjusting Speed Sensor - Gazelle Makki Benutzerhandbuch

56
2. Inflate the tyre:
•
to 3.2 bar for optimal cycling comfort;
•
harder with higher loads.
" "
WARNING
The maximum tyre pressure is stated on the
sidewall of the tyre (4 bar).
3. Remove the pump.
Makki

4.3.5 Adjusting speed sensor

The speed sensor and the associated spoke magnet must be
mounted in such a way that, after a turn of the wheel, the spoke
magnet moves past the line of the speed sensor with a
clearance of at least 5 mm and no more than 17 mm.
Adjusting speed sensor
1. Unscrew the screw of the spoke magnet
2. Position the spoke magnet
33
turn of the wheel it moves past the line of the speed
sensor with a clearance of at least 5 mm and no more
34
than 17 mm.
3. Fasten the spoke magnet
33
" " If after adjusting the speed you do not
REMARK
see it displayed on the on-board computer,
contact a Gazelle service specialist.
.
33
in such a way that after a
by tightening the screw.
34
33