EN
NL
4
Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren Eclips XXL has been designed entirely for your comfort. This wheelchair can be
adjusted to individual requirements as explained below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
WARNING
Use only the settings described in this manual.
Variation of allowed adjustments can still change the stability of your wheelchair (tilt back or
sideways).
4.1
Tools
To set up the wheelchair the following tools are needed.
Wrench set n° 10 to n° 19
Allen key set n° 4 to n° 5
Screwdriver Phillips head
4.2
Manner of delivery
The Vermeiren Eclips XXL shall be delivered with:
1 frame with arm supports, rear and front wheels
1 pair footrests
Anatomical seat (fixed)
Anatomical back (fixed)
Tools
Manual
Accessories
4.3
Adjust the brakes
WARNING
Brakes may only be adjusted by your specialist dealer.
Adjust the brakes according following rules:
1. Disconnect the brakes by pulling lever backwards.
2. Loosen the bolts so the brake mechanism can slide over the
guide .
3. Pull the brake mechanism over the guide to the desired
position.
4. Retighten the bolts .
5. Check working of the brakes.
6. If necessary repeat the above steps until the brakes are
adjusted well.
Risk of injuries and damage
Risk of injury
12
Eclips XXL
2023-01
Installation and adjustment