Characteristics Noise Values; Normal Intended Use; Residual Risks - ATIKA KGS 210 N Originalbetriebsanleitung

Symbols machine
Warning! The device may cause serious injuries.
Carefully read operator's manual before handling the
machine. Observe instructions and safety rules when
operating.
Before starting any work on the machine or trans-
porting it, turn it off and disconnect the mains plug.
Wear eye and ear protection
Wear dust mask.
Risk of injuries of fingers and hands by the saw
blade
Do not expose to rain. Protect against humidity.
Danger area! Keep hands, fingers or arms away
from this area as much as possible.
This product complies with European regulations
specifically applicable to it.
Machine of the protection class II (double insulated)
Electrical devices do not go into the domestic rubbish.
Give devices, accessories and packaging to an
ecofriendly recycling.
According to the European Directive 2012/19/EC on
electrical and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility for
an environmentally compatible recycling.
Characteristic noise values
DIN EN ISO 3744 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of machine as crosscut and mitre saw with standard saw
blade.
Noise power level Sound pressure level at the workplace
L = 106 dB(A)
WA
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a relation-
ship between emission and immersion levels, it can be reliably deduced
whether additional precautionary measures are necessary or not. Factors,
which can influence the immersion level currently existing at the workplace
include the duration of the effects, the special type of the workroom, other
noise sources, etc. e.g. the number of machines and other adjacent pro-
cesses. The permissible workplace values can also vary from country to
country. This information should however enable an improved assessment
of the danger and risk to be carried out.
L = 93 dB(A)
PA

Normal intended use

 The device is suitable to cut wood and other wood-type
materials (e.g. particle boards) in the house and hobby field.
 The device is suitable for crosscuts, inclined cuts, mitre cuts
and double mitre cuts.
 The cutting of round material and irregularly shaped materi-
als (rickers, poles, fire wood etc.) is not permitted since
these work pieces cannot be held securely.
 Only work pieces that can be put down securely and held
with clamping devices may be processed.
 The use of saw blades made of HSS steel (high-alloy high
speed steel) is not permitted since this steel is hard and brit-
tle. Risk of injury through saw blade breakage and expulsion
of saw blade pieces.
 The intended usage also includes compliance with the oper-
ating, servicing and repair conditions prescribed by the man-
ufacturer and following the safety instructions included in the
instructions.
 The relevant accident prevention regulations for the opera-
tion as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
 Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
 Independently made alterations to the circular saw preclude
any liability of the manufacturer for resulting damages of any
kind.
 The circular saw may only be equipped, used and serviced
by persons who are familiar with these and have been in-
structed in the hazards. Repair works may only be carried
out by us or by a customer service agent nominated by us.
 The machine may not be used in a potentially explosive
environment or be exposed to the rain.
 Metal parts (nails, etc.) must be removed from the timber to
be sawn.

Residual risks

Even if used properly, residual risks can exist even if the rele-
vant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the original instruc-
tions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
 Danger of injury of fingers and hands by the tool (saw blade)
or work piece, e.g. when replacing the saw blade.
 Injury from parts of the workpiece spinning off.
 Throwback of the workpiece or workpiece parts.
 Breakage and expulsion of saw blade.
 Risk from electricity, by using non-standard electrical con-
nections.
 Touching live parts of opened electrical components.
 Impairment of hearing when working on the machine for
longer periods of time without ear protection.
 Emission of harmful timber dust when operating without
exhaust suction.
11