Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Keep the operating instructions in a safe place for
future use.
Pass the operating instructions on to all persons
who work with the machine.
You may not start to operate the ma-
chine until you have read these origi-
nal instructions, observed all the in-
structions given and installed the
machine as described!
This machine must not be operated /
!
used by children, persons with re-
stricted physical, sensory or mental
abilities or a lack of experience and/or
know-how or by persons who are not
familiar with the instructions. Local
regulations may stipulate an age re-
striction for the user.
The machine must not be operated by
!
children or young people under 18
years of age.
EC Declaration of Conformity
No. (S-No.): 13603
according to EC directive: 2006/42/EC
We,
Altrad Lescha Atika GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Kapp- und Gehrungssäge (Crosscut and Mitre Saw)
Type / Model KGS 210 N
Serial number: 000001 - 020000
is conform with the above mentioned EC directive as well as
with the provisions of the guidelines below:
2014/30/EC and 2011/65/EC
Following harmonized standards have been applied:
EN 55014-1:2006/+A1:2009+A2:2011; EN 55014-2:2015;
EN 61000-3-2:2014; EN 61000-3-3:2013;
EN 62841-1:2015+AC:15; EN 62841-3-9:2015+AC:16+A11:17
Duly authorised person for the complilation of technical
documents:
Altrad Lescha Atika GmbH - Technical department -
Josef-Drexler-Str. 8, 89331 Burgau - Germany
i.A.
Burgau, 05.12.2019
i.A. G. Koppenstein,
Engineering design management
10
Contents
Extent of delivery
Crosscut and mitre saw KGS 210 N (preassembled unit)
Dust bag
Accessories bag
Vise assembly
Original instructions
Warranty declaration
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Symbols Original instructions
Threatened hazard or hazardous situation. Not ob-
serving this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not ob-
serving this instruction can lead to faults in the machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly
and operating instruction sheet for
references to figure numbers in the text.
...
10
10
10
11
11
11
12
12
12
13
13
14
14
15
15
15
16
16
Werbung
Kapitel
Inhaltsverzeichnis
