OEM TL45 Gebrauchsanweisung Und Warnhinweise Seite 150

7.2.2.4. REPLACEMENT OF A LAMP
In order to replace a lamp, proceed as follows:
ACTION
S
TEP
Remove the glass joint (A).
1
Remove the burnt out lamp (B).
2
Replace with the new lamp.
3
Reassemble the glass joint (A).
4
B
ATTENTION!
This is a halogen lamp.
DO NOT TOUCH WITH YOUR FINGERS.
Page 150
A
EC-compliant use and warning instructions
CHAPTER 7 – MAINTENANCE