Reference Directives - OEM TL45 Gebrauchsanweisung Und Warnhinweise

1.5. Reference Directives

The machine supplied by
machines listed in the list covered in Annex IV of the
conformity of the machine to the present
of compliance assessing with internal control on the
In order to certify the machine's compliance with the provisions of the
UNICO before to entry in the market , carried out the risk assessment in order to verify compliance with the essential
safety and health requirements provided by the Directive as well as the tests and
reference rules. The technical construction file was produced in accordance with Annex VII of the 2006/42/CE
Directive and it is available to be verified by
legislation.
OEM ALI GROUP S.R.L A SOCIO UNICO provides the introduction on the market of the machine by equipping it and
accompanying it with:
CE Marking
CE Declaration of Conformity
Instruction and Warning Manual
Please note that the oven was designed according to the following Guidelines:
2006/42/CE
2014/30/UE
CHAPTER 1 – IDENTIFICATION
OEM ALI GROUP S.R.L A SOCIO UNICO does not belong to one of the categories of
directive,
supervisory bodies on a reasoned application, as required by the relevant
(Documentation drawn up in paragraph 1.7.4 of the Machines Directive
2006/42/CE)
Machines Directive
Electromagnetic Compatibility Directive
Directive; therefore, for
OEM ALI GROUP S.R.L A SOCIO UNICO applies the procedure
manufacture of the machine,
Directive,
PIZZA OVEN mod. Tl
the purpose of the declaration of
see attached VIII.
OEM ALI GROUP S.R.L A SOCIO
checks provided by the relevant
Page 91