Silvercrest SHZK 600 A1 Bedienungs- Und Sicherheitshinweise Seite 24

The product is equipped with a
thermal fuse that automatically
cuts off the power supply if
the product overheats . If this
safety device has turned off the
product, disconnect the power
cord from the socket-outlet and
let the product cool . Once the
product has cooled down, you
can connect the power plug
back into the socket-outlet and
use the product normally .
Cleaning and storage
mWARNING! Risk of
injury! Disconnect the
product from the power supply
before cleaning work and
when not in use .
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping
and splashing water .
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children .
Protect the product against
heat . Do not place the product
close to open flames or heat
sources such as stoves or
heating appliances .
˜ Before first use
Remove all packaging material and lay out
all separate components in front of you . After
unpacking, check the product for visible
damage .
˜ Mounting the wall bracket
m
WARNING! Risk of electric shock!
Before drilling, make sure that you cannot
damage any cables or pipes in the wall .
NOTE: Mount the wall bracket
height at which the product with mounted
telescopic tube
[ 10 ]
parked (approx . 90 cm) .
Required tools:
– Power drill
– Drill bit (7 mm)
– Cross slit screwdriver
Mark the 2 drill holes for the wall bracket
(Fig . B) .
Drill the 2 holes .
Insert the 2 dowels
Attach the wall bracket
NOTE: Make sure the screws
tightened to ensure the stability of the wall
bracket .
17 ] [
at a
17 ] [
and floorhead can be
12 ] [
into the drill holes .
19 ] [
with 2 screws
17 ] [ 20 ] [
are
20 ] [
GB/IE
17 ] [
.
23