Maintenance And Spare Parts - Phonak SafetyMeter Gebrauchsanweisung

12 Service and warranty
Serial number of SafetyMeter soundcard:
Date of SafetyMeter purchase:

12.1 Maintenance and spare parts

The following spare parts are available to buy:
u Headphone pads
For hygienic reasons, these pads should be cleaned at regular intervals using
antiseptic wipes; when damaged they should be replaced.
u Headphone cable
The cable can be detached from the headphones by pulling the connectors straight
out of the sockets. DO NOT screw/unscrew the headphones' sockets, as it will
damage the headphones!
u EarJack probe, Classic probe
u Check disc 1, Check disc 2
u USB cable
12.2 Assistance
Please report SafetyMeter problems, unusual attenuation control results or unusual
system behavior to your sales contact or to :
Phonak Communications on: safetymeter@phonak.com
25
004 mode emploi.indd 25
_________________________________
_________________________________
24.6.2010 15:33:40