Phonak SafetyMeter Gebrauchsanweisung Seite 20

6 "Attenuation control" mode
If the protection being tested is reported to be invalid, check that the probes are
properly attached to the shells and that the shells are being worn correctly. Then
restart the measuring process.
Measuring can be repeated several times for the same user by using the 'Restart measuring'
option. When re-running this process again the results from the previous test will not be
saved.
The latest measurement results will only be stored by clicking the 'Save and go to next
user' button.
To preview the Attenuation Control Certificate click the Preview icon at the bottom-left
of the screen
i
Print preview allows you to :
u Check the certificate's layout and content
u Zoom in/out
u Print the certificate
u Save the certificate as a PDF file
u Add the PDF certificate as an e-mail attachment
14
004 mode emploi.indd 14
.
24.6.2010 15:33:38