Phonak SafetyMeter Gebrauchsanweisung Seite 26

8 "Demonstration" mode
In demonstration mode the operator can show a customer what an attenuation control
session involves by moving through the different control screens, which display typical
data. A "Demonstration" watermark is visible on-screen at all times.
Demonstration mode can be selected from the "Mode" menu and run when the SafetyMeter
soundcard is connected to the PC.
Demonstration mode can be run without a SafetyMeter soundcard being connected to
the PC. The following message appears at start-up.
Select "Demo mode" to perform a demonstration.
9 "Data browser" mode
Data browser mode allows attenuation results for any given company to be exported to
an Excel file.
Select the company for which you require attenuation results via the drop-down menu
at the top of the window
Select the dates
20
004 mode emploi.indd 20
.
e
of the results you require.
r
24.6.2010 15:33:40