Operation; Inserting/Removing The Battery; Checking The Battery Charge Level - Parkside PLLA 12 C3 Originalbetriebsanleitung

cleaning the charger.
• Do not subject the bat-
tery to strong sunlight
over long periods and
do not leave it on a he-
ater. Heat damages the
battery and there is a
risk of explosion.
• Allow a hot battery to
cool before charging.
• Do not open up the
battery and avoid me-
chanical damage to the
battery. Risk of short
circuit and fumes may
be emitted that irritate
the respiratory tract.
Ensure fresh air and
seek medical assist-
ance.
• Do not use non-rechar-
geable batteries!
• Do not use any accesso-
ries that are not recom-
mended by PARKSIDE.
This can result in
electric shock or fire.
Observe the safety
information and
notes on charging
and proper use as shown
in the instruction manual
for your battery and char-
ger from the Parkside
X 12 V TEAM series. A de-
tailed description of the
charging process and fur-
ther information can be
found in the separate
operating instructions.

Operation

Inserting/removing
the battery
1. To insert the battery (3),
place it on the guide track
and push it back into the
appliance. It will audibly
snap in.
2. To remove the battery (3)
from the appliance, press
the release buttons (2) on
the battery and pull out the
battery.
Checking the battery
charge level
The battery's (3) charge level is
indicated by the charge state
indicator (7).
GB IE
21