Final Assembly - Teufel WJT 5 Gebrauchsanweisung

Final Assembly

Assemble the prosthesis for
fitting. Pay attention to the
instructions for the different
components.
Make sure that the lock
body is completely free
of any residue (e.g. resin residue,
dust, etc.) before final assembly.
Do not drill through
the pin duct.
Torque for the locking mecha-
nism in the lock body: 5 Nm.
WJT 5 Lock System
Button
Extension
Two different button exten-
tions are available, which can
be bought as accessoires if
required. They are used instead
of the original button. To replace
the original button, unscrew it
from the locking mechanism,
and install one of the button
extensions.
If the standard button of
the locking mechanism is re-
placed by a button extension,
the button extension has to be
secured with superglue (not
Loctite!) during installation!
ES
FR
User Manual EN
DE
EN-13
D D