Final Assembly - Teufel WJT 1 Gebrauchsanweisung

Final Assembly

Assemble the prosthesis for
fitting. Pay attention to the
instructions for the different
components.
Make sure that the lock
body is completely free
of any residue (e.g. resin residue,
dust, etc.) before final assembly.
Do not drill through
the pin duct.
Torque for the locking mecha-
nism in the lock body: 5 Nm.
Button Extension
Two different button exten-
tions are available, which can be
bought as accessoires if re-
quired. They are used instead of
the original button. To replace
the original button, unscrew it
from the locking mechanism,
WJT 1 Lock System
and install one of the button
extensions.
If the standard button of the
locking mechanism is replaced by
a button extension, the button
extension has to be secured with
superglue (not Loctite!) during
installation!
ES
FR
User Manual EN
DE
EN-15
D D