Troubleshooting - Silvercrest SPBL 8000 A1 Bedienungs- Und Sicherheitshinweise

lightly to begin the charging process. The current
battery status of the power bank
during the charging process by the LED indica-
tor .
2
To end the charging process, separate the USB
charging cable from the mobile device and the
power bank
interrupted by pressing the ON / OFF key
quickly twice. The LED indicator
off after approx. 30 seconds.

Troubleshooting

= Problem
= Cause
= Solution
The power bank
It may be that the power bank is not connected
properly.
Check that it is connected.
In order to charge the power bank, a power
supply with 5 V and at least 2 A has to be used.
or the charging process can be
5
is not being charged.
5
is shown
5
1
will switch
2
GB/IE 39