Replacing The Oven Lamp - Atag OX6411LR Betriebsanleitung

MAINTENANCE AND CLEANING

Replacing the oven lamp

Cover the bottom of the oven with a cloth. This will prevent damage to the glass cover and oven
interior. The lamp in this household appliance is only intended for this device. The lamp is not
suitable for lighting a household area.
WARNING! Danger of electric shock! Disconnect power to the appliance before you
change the oven lamp: unplug the mains lead from the outlet, or remove the fuse or trip
the circuit breaker in the meter closet!
CAUTION! The halogen lamp may be very hot! Use protection when removing the lamp.
CAUTION! Always hold the halogen lamp with a cloth to prevent traces of oil on your
fingers from burning the oven lamp.
Replacing the lamp
1. Turn the glass cover of the lamp to the right and remove it.
2. Clean the glass cover.
3. Replace the lamp with a heat-resistant oven lamp suitable for 300 °C.
4. Fit the glass cover.
EN 22