Silvercrest SLB 20 A1 Bedienungsanleitung Seite 90

The following table will help you to identify
and rectify further possible faults:
Fault
The
speaker
will not
switch
on.
No
sound.
SLB 20 A1
Possible
cause
The internal
battery is
empty.
The speaker
is not
switched on.
The volume
is set to
minimum.
Remedy
Charge the
internal battery
(see section
Charging
the internal
battery)
Press and hold
button
the
2
for about
2 seconds
to switch the
speaker on.
Set the desired
volume with
the button
6
. If nec-
essary, also
increase the
volume on the
external play-
back device.
GB │ IE │
87 ■