Herunterladen Inhalt Inhalt Diese Seite drucken

Transport Instructions; Storage; Guarantee; Possible Faults - ATIKA ASP 16 N-2 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Hydraulic oil
We recommend the following hydraulic oils for the hydrau-
lic cylinder:
 Shell Tellus T 22
 Aral Vitam Gf 22
 BP Energol HLP 22
 Mobil DTE 11
 or equivalent
Do not use any other types of oil. The use of any other
type of oil will adversely affect the operation of the hydrau-
lic cylinder.

Transport instructions

Before each transport
 Move the splitting blade up
 Switch off device.
 Close the oil cap.
 Pull out power plug
 Remove the split wood
Loosen the locking pin (A) and fix the transport support
wheel (7) in position C for transport.
 Grasp the handle and carefully tilt the firewood splitter to-
wards you.
If necessary, swivel the transport drawbar down.
 Now you can easily transport the firewood splitter.
Use the lifting point (A) provide for transport with a
crane.

Possible faults

Before each fault elimination:
 Switch off device.
 Pull out power plug
Problem
Logs are not being split
properly
(insufficient splitting perfor-
mance)
Splitting blade extends wob-
bling or with strong vibrations
20
order no. 400142 (1 litre)
Possible Cause
 The log is not positioned correctly
 The log exceeds the maximum dimen-
sions or the wood is too hard for the per-
formance of the machine
 Splitting blade does not split log
 Oil leak
 Hydraulic pressure too low
 Incorrect connecting lead (longer than
10 m or too small cable cross-section).
 Air in the circuit
 Splitting column not sufficiently lubricat-
ed or oiled
 Secure the device against tipping over or sliding away when
transporting it by crane.
 When transporting the unit in a car put it on a separate
loading area.
While doing so, secure the log splitter at the points
provided with straps.

Storage

Before each storage
 Move the splitting blade up
 Switch off device.
 Close the oil cap
 Pull out power plug
Store machines that are not in use in a dry locked place pro-
tected against frost and outside the reach of children and unau-
thorized persons.
Before extended storage, please observe the following to in-
crease the service life of the device and to ensure smooth
operation:
Thoroughly clean the device.
Check the device for damaged or worn parts.

Guarantee

Please observe the enclosed terms of guarantee.
Remedy
 Reposition the log correctly
 Cut the log to the required dimensions
 Sharpen splitting blade, check for burrs or notches
 Place a sheet of cardboard under the log splitter in
order to locate the leak. To correct the problem, re-
fer to the manufacturer
 Check the oil level and add more oil if necessary
If the problem cannot be rectified, refer to the man-
ufacturer
 Use the correct connecting lead
 Open oil tank cap
 Check the oil level and add more oil if necessary
 Lubricate splitting column or oil with environmental-
ly friendly spray oil.
If the problem cannot be rectified, refer to the man-
ufacturer

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Asp 20 n-2

Inhaltsverzeichnis