Installation Of The Indoor Unit - Daikin FDYMP75DXV1 Installationshandbuch

Mounting
Ensure that the overhead supports are strong enough to hold
the unit's weight. Position hanger rods and check for alignment
with the unit. Check that hangers are secure and that the
base of fan-coil unit is level in the two horizontal directions,
taking into account the gradient recommended for drainage
flow as shown.
Check the gradient recommended for drainage flow as
follow.
50mm
300mm
* for free return of air
Provide clearance for servicing and optimal air flow as shown
in the diagram.
The indoor unit must be installed such that there is no short
circuit of cool discharge with air discharge.
Respect the installation clearance.

INSTALLATION OF THE INDOOR UNIT

300mm*
500mm
300mm
FG(Y)M(P) 75~100D
800.0
FD(P) 125 ~ 150D / FDY(P) 125~200E
800.0
FG(P) 200 ~ 500D
800.0
FGY(P) 250~600E
800.0
Note: **For FGY(P) 400-600E
1-9
800.0
800.0
800.0
1000.0
**1500.0
All dimensions in mm