Operation - Cameo FLAT PAR CAN TRI 3W Bedienungsanleitung

OPERATION:

STATIC COLOUR
Press the MODE button repeatedly until "C000" appears in the display. Press
ENTER and then use the UP and DOWN buttons to select the desired colour
or the stroboscopic effect ("C1" = red, "C2" = green, "C3" = blue, "CF" =
stroboscopic effect). The last two numerals stand for the brightness (00 - 99)
and, in "CF" mode, for the stroboscope speed. For example: If you set C1,
C2, and C3 to "00", all LEDs in the light are off (blackout). If you set C1 to
"99" and C2 and C3 to "00", then the light shines 100% red.
RED
Luminosity 00 - 99
GREEN
Luminosity 00 - 99
BLUE
Luminosity 00 - 99
STROBE
Stroboscope speed 00 - 99
9