Cameo FLAT PAR CAN TRI 3W Bedienungsanleitung Seite 10

OPERATION:
COLOUR CHANGE
Press the MODE button repeatedly until "JU00" appears in the
display. Now the light is in colour change mode. Afterwards,
press ENTER and then use the UP and DOWN buttons to choose
the function 7 colours "JU00" or stroboscope "JF00". To set the
colour-change and stroboscope rate (00 - 99), press ENTER again
(all 4 characters of the display blink) and then use the UP and
DOWN buttons to change the values. To confirm, press ENTER
again.
Note: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
COLOUR BLENDING
Press the MODE button repeatedly until "FA00" appears in the display.
Now the light is in colour blending mode. Afterwards, press ENTER
and then use the UP and DOWN buttons to choose the function 7
colours "FA00" or stroboscope "FF00". To set the colour-blending and
stroboscope rate (00 - 99), press ENTER again (all 4 characters of the
display blink) and then use the UP and DOWN buttons to change the
values. To confirm, press ENTER again.
Note: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
10