Bartscher C4431D Original-Gebrauchsanleitung Seite 59

Cooking with use of programs
•
The convection oven enables in the MANUAL operation by pressing the
PROGRAM / MANUAL key to get to the mode with the PROGRAMS. The LEDs
PROGRAMS and PHASES light. The recipe P01 appears flashing on the display
COOKING SPACE / PROGRAMS.
•
Select a cooking program with the INCREASING or REDUCING keys. After 5 seconds
the saved values appear in the display COOKING SPACE / PROGRAMS.
•
It is now possible, to set the values of time, temperature and steaming of the various
phases as described in the previous subparagraphs. The LEDs PHASES always
indicate which phase of the program is currently running.
•
It is possible at any time to display the selected program by pressing the
PROGRAM / MANUAL key
•
The cooking program starts by pressing the START / STOP key.
•
After lapsing of 40 seconds the acoustic signal goes out and the convection oven is
ready to repeat the selected program in advance.
•
Otherwise the acoustic signal goes out within 40 seconds when the START / STOP
key is pressed and the convection oven returns to the MANUAL cooking mode.
PROGRAM SAVING:
Press and hold the PROGRAM / MANUAL key for 4 seconds.
The saving performed is confirmed for several seconds by an acoustic signal and the
display of the number of the programs together with the MEM display confirmed.
RETURN TO MANUAL COOKING:
In order to return to the mode MANUAL COOKING and to end the mode PROGRAMS
perform the following steps:
By pressing the PROGRAM / MANUAL key, the number of the previously
selected programs is displayed for 5 seconds. If the PROGRAMS / MANUAL key
is pressed within these 5 seconds, the indication of MANU (manual) appears in
the display. After 5 seconds this selection is automatically saved.
The LEDs of PROGRAMS and PHASES go out in the course of manual cooking.
- 55 -